MIRCH Kraken Blizzard | Snow Foam Wash
MIRCH Kraken Blizzard | Snow Foam Wash
MIRCH Kraken Blizzard | Snow Foam Wash
MIRCH Kraken Blizzard | Snow Foam Wash MIRCH Kraken Blizzard | Snow Foam Wash MIRCH Kraken Blizzard | Snow Foam Wash

A true specialised pre-wash - delivering thick foam, high performance cleaning, and zero stress on your protection.

MIRCH Kraken Blizzard is a high-performance, pH-neutral snow foam designed to lay down a dense layer of foam that clings, cleans, and clears without affecting your protection.

It is chemically built with a high concentration of solids, which means even at low dilution rates (say as little as 30mL) it can still generate a thick, rich lather that coats the entire vehicle.

But it’s more than just a visual show. Kraken Blizzard is formulated to bind to grime and road film, using a well-balanced blend of surfactants and sequestrants to loosen and encapsulate dirt while it dwells. That means real cleaning performance without any aggressive chemicals or alkaline bite.

Unlike typical thick foams that can struggle to dissolve or disperse properly, Kraken Blizzard uses a substantial percentage of hydrotropes - so it mixes easily with water, even in colder conditions or higher concentrations. No clumping. No agitation needed. Just pour it in and it gets to work.

It’s pH-balanced (sitting around 7–8), so it’s safe on waxes, sealants, ceramic coatings, trims, and sensitive finishes. Use it in a foam cannon or lance to lay down a consistent layer of foam, let it dwell for a few minutes, then rinse it off and watch the dirt go with it.
Whether you're prepping for a full detail or just want a safer, more satisfying pre-wash routine, Kraken Blizzard does the heavy lifting up front - maintaining your protection and making your wash safer & more effective. 


It’s also incredibly cost-effective due to its concentrated formula, making it a perfect fit for detailers & enthusiasts who demand high performance & value, without compromise. 
If you want a foam solution that’s not just thick for the sake of it - but actually lifts and removes grime while staying safe, Kraken Blizzard has got you covered with serious results & minimal product. Once the Kraken is called, dirt and grime are finished. 

Previous version known as "HULK".

-

Summoned from the deep, the Kraken calls. A blizzard of foam cloaks the surface, gripping dirt & grime in silence before washing it away. 

 

FEATURES

  • Incredible Foam with Minimal Product - Kraken Blizzard is packed with high-concentration solids - so even at low dilution (as little as 30mL), it produces a thick, clinging foam that blankets the surface. Perfect for detailers & enthusiasts who want performance & value.
  • pH Neutral & Protection Safe - Despite its serious cleaning power, Kraken Blizzard sits at a pH of 7–8, meaning it’s safe on coatings, waxes, sealants, sensitive finishes, the lot.
  • Soil Encapsulation & Dwell Cleaning - This isn’t just thick foam. Its blend of surfactants and sequestrants breaks down grime and road film, then binds to it while the foam dwells - lifting it cleanly when rinsed.
  • Mixes Instantly with No Hassle - Thanks to a high percentage of hydrotropes, Kraken Blizzard dissolves into water with little to no agitation - even in cold or hard water. No clumps, no residue, just pour and go.
  • Built for Foam Cannons & Lances - Designed specifically for pre-wash use, Kraken Blizzard runs flawlessly through foam cannons or lances - delivering consistent coverage and dwell time every wash.

 

DIRECTIONS

Kraken Blizzard is a dedicated pre-wash foam. That means it’s designed to soften and break down dirt before your contact wash - so you’re not grinding grime into the paint. It won’t affect your protection, and it works best in a foam cannon or lance.

Foam Cannon:

  • Start by preparing your foam cannon solution, with a dilution ratio of between 1:15 and 1:25.
  • For example at 1:25, at say 800mL of water, you can add 30-40mL of Kraken Blizzard.
  • Foam the vehicle (not in direct sunlight, and in cooler temperatures), and let the solution dwell for up to 5 minutes.
  • Rinse off the foam and your pre-wash process is sorted.

 

The MIRCH Difference.

PROFESSIONALLY CREATED FORMULAS
We have real chemical engineers working with us to formulate the best. Not only do we have industrial experience, but our formulas are backed by real science.

PROUDLY MADE IN AUSTRALIA
To maintain the highest quality possible and to support Australian business, we produce, source and have all operations in Australia. Australian made is quality.

PROVEN BY INDUSTRIAL APPLICATION
MIRCH is an industrial supplier to many professional detailers, cleaners, workshops and more.

OUR GUARANTEE
We do not over-sensationalise items with false marketing. Our products produce real results with real claims.

MIRCH Kraken Blizzard | Snow Foam Wash

$12.53

A true specialised pre-wash - delivering thick foam, high performance cleaning, and zero stress on your protection.

MIRCH Kraken Blizzard is a high-performance, pH-neutral snow foam designed to lay down a dense layer of foam that clings, cleans, and clears without affecting your protection.

It is chemically built with a high concentration of solids, which means even at low dilution rates (say as little as 30mL) it can still generate a thick, rich lather that coats the entire vehicle.

But it’s more than just a visual show. Kraken Blizzard is formulated to bind to grime and road film, using a well-balanced blend of surfactants and sequestrants to loosen and encapsulate dirt while it dwells. That means real cleaning performance without any aggressive chemicals or alkaline bite.

Unlike typical thick foams that can struggle to dissolve or disperse properly, Kraken Blizzard uses a substantial percentage of hydrotropes - so it mixes easily with water, even in colder conditions or higher concentrations. No clumping. No agitation needed. Just pour it in and it gets to work.

It’s pH-balanced (sitting around 7–8), so it’s safe on waxes, sealants, ceramic coatings, trims, and sensitive finishes. Use it in a foam cannon or lance to lay down a consistent layer of foam, let it dwell for a few minutes, then rinse it off and watch the dirt go with it.
Whether you're prepping for a full detail or just want a safer, more satisfying pre-wash routine, Kraken Blizzard does the heavy lifting up front - maintaining your protection and making your wash safer & more effective. 


It’s also incredibly cost-effective due to its concentrated formula, making it a perfect fit for detailers & enthusiasts who demand high performance & value, without compromise. 
If you want a foam solution that’s not just thick for the sake of it - but actually lifts and removes grime while staying safe, Kraken Blizzard has got you covered with serious results & minimal product. Once the Kraken is called, dirt and grime are finished. 

Previous version known as "HULK".

-

Summoned from the deep, the Kraken calls. A blizzard of foam cloaks the surface, gripping dirt & grime in silence before washing it away. 

 

FEATURES

  • Incredible Foam with Minimal Product - Kraken Blizzard is packed with high-concentration solids - so even at low dilution (as little as 30mL), it produces a thick, clinging foam that blankets the surface. Perfect for detailers & enthusiasts who want performance & value.
  • pH Neutral & Protection Safe - Despite its serious cleaning power, Kraken Blizzard sits at a pH of 7–8, meaning it’s safe on coatings, waxes, sealants, sensitive finishes, the lot.
  • Soil Encapsulation & Dwell Cleaning - This isn’t just thick foam. Its blend of surfactants and sequestrants breaks down grime and road film, then binds to it while the foam dwells - lifting it cleanly when rinsed.
  • Mixes Instantly with No Hassle - Thanks to a high percentage of hydrotropes, Kraken Blizzard dissolves into water with little to no agitation - even in cold or hard water. No clumps, no residue, just pour and go.
  • Built for Foam Cannons & Lances - Designed specifically for pre-wash use, Kraken Blizzard runs flawlessly through foam cannons or lances - delivering consistent coverage and dwell time every wash.

 

DIRECTIONS

Kraken Blizzard is a dedicated pre-wash foam. That means it’s designed to soften and break down dirt before your contact wash - so you’re not grinding grime into the paint. It won’t affect your protection, and it works best in a foam cannon or lance.

Foam Cannon:

  • Start by preparing your foam cannon solution, with a dilution ratio of between 1:15 and 1:25.
  • For example at 1:25, at say 800mL of water, you can add 30-40mL of Kraken Blizzard.
  • Foam the vehicle (not in direct sunlight, and in cooler temperatures), and let the solution dwell for up to 5 minutes.
  • Rinse off the foam and your pre-wash process is sorted.

 

The MIRCH Difference.

PROFESSIONALLY CREATED FORMULAS
We have real chemical engineers working with us to formulate the best. Not only do we have industrial experience, but our formulas are backed by real science.

PROUDLY MADE IN AUSTRALIA
To maintain the highest quality possible and to support Australian business, we produce, source and have all operations in Australia. Australian made is quality.

PROVEN BY INDUSTRIAL APPLICATION
MIRCH is an industrial supplier to many professional detailers, cleaners, workshops and more.

OUR GUARANTEE
We do not over-sensationalise items with false marketing. Our products produce real results with real claims.

You may also like

Recently viewed